The air curtain causes a high-speed cyclone, divides the outdoor into two separate temperature regions to create comfortable indoor air, maintain the actual effect of home air conditioning and clean air, save electromagnetic energy, and make the air circulation system reasonably protect against dust, Smoke, odor, insects and microbial strains.

  Avoid the loss of cold (warm) airflow, save electricity consumption, the air door that is constantly generated, can reasonably avoid the leakage of cold (warm) air, save power consumption, divide the outdoor into two separate temperature regions, assist when the air conditioner runs for a long time The tool circulation system adjusts the temperature to save resources and improve the natural environment. Anti-fouling and anti-moth effect The air curtain machine causes high-speed cyclones and generates a maintenance door, which can reasonably block outdoor dust and insects from invading and maintain room cleaning.

  Pneumatic Smoke Exhaust System and Practical Effects of Harmful Substances The air-breathing system of the air curtain allows the corners of the room to be super strong isolated from the spicy smell of kitchen fumes and harmful substances such as organic exhaust gas and car exhaust pipes entering the room. The actual effect of the air circulation system is when the distribution of central air conditioning kinetic energy is uneven due to the large indoor space in stadiums, theaters, private clubs, etc., and the air breathing system of the air curtain machine achieves temperature balance in the room.

   The type of selection depends on the total width and height of the door, the length of the air curtain and the direct ratio of the impeller. The total width of the door is slightly shorter than the length of the shell, and two or two sets can be used in series. When the door is high, you can choose a model with a large impeller straight through, on the contrary you can choose a model with a small wheel diameter. In the natural environment, the model with a small wheel diameter can be selected for the noise, but the model with a large wheel diameter is selected.

Equipment and maintenance: The natural environment of the air curtain machine application address is high temperature 40 ℃, ultra-low temperature is -10 ℃, there should be no shock, impact, no water droplets splashed or steam filled, and the material is resistant to corrosion and destroys the insulation layer Where there are vapors and conductive media or where there is a risk of engineering blasting.

   1. The machine should be equipped with no shock hazard (otherwise it will cause shock or noise expansion and damage parts).

   2. The machine should be installed on the back side of the door.

   3. The height of the machine (effective distance from ground height) is 2-3 meters.

   4. The bottom of the air outlet is approximately flush with the bottom of the door frame.

   5. The door is spacious and can be used in parallel with two or more sets of parallel plane equipment. The time in the middle of each air curtain machine is maintained at 20-40mm.

   6. The air curtain and the wall are not suitable for storing a yard.

   7. Generally, a total of 1500 hours should be used for maintenance.

   8. Before cleaning the machine, block the switching power supply.

   9. Please use a soft brush for combing the PTCR heating plate. The cotton fabric is dipped in cold water or a vacuum cleaner to clean the heat pipe cooling strip and the safety protection net in the courtyard to prevent electrical short circuit failure.

   10. Never use gasoline, oil, paint thinner, etc. to clean the machine.